In industries where scale is large and accuracy is critical, production risk often comes not from a single operation, but from the accumulation of deviations and dependencies along the execution chain. It is in this logic that TM-Technology JSC is expanding its machine park with three new solutions aimed at key stages in large-scale production: a custom-built gantry machining center, a 30 kW laser cutting machine for large-format sheets, and a renovated lathe for long rotary parts.

За възложителите това обикновено означава по-ясна предвидимост по отношение на срокове, качество и технологична последователност, особено при проекти в корабостроенето и тежкото машиностроене.

Portal Machining Center for Large Parts: Special Design for Complex Assemblies

Large-sized structures and assemblies often require final machining to ensure dimensional and geometric accuracy, especially after welding and thermal influences. The new gantry machining center is designed to meet individual requirements and is aimed at processing large parts and assemblies, including in heavy-duty industrial applications.

Among the key parameters are working strokes of 17.5 m / 7.6 m / 2.5 m / 2.5 m, a rotary table with a diameter of 3 m and a load capacity of 40 t, as well as the ability to process parts up to 80 t.

30 kW Laser Cutting: Wide Format and Thicknesses up To 80 mm

Cutting is one of the operations that most often sets the pace of the entire project, especially when working with large sheets and thicknesses. The 30 kW laser cutting machine is designed for cutting large-format steel sheets up to 80 mm, with a 4 x 24 m work table and a 3D laser head for bevels up to 45 degrees.

The practical effect of the 3D head is the ability to prepare edges during cutting. This in many cases reduces or eliminates the need for additional mechanical preparation before welding and aids repeatability with thick materials and specific joints.

Renovated Lathe for Large Rotary Parts: Emphasis on Accuracy

Long rotary parts are a category where capacity is limited and machining accuracy and stability are crucial. The renovated lathe at TM-Technology's production facility is designed for parts up to 10 m long, 1450 mm in diameter and a maximum mass of 16 tons.

An important clarification is that the renovation includes a complete renewal of drive mechanisms, electronics, monitoring systems and control, which is directly related to the goal of guaranteed dimensional and geometric accuracy for this type of parts.

The Combination: Fewer Risk Points Along the Fulfillment Chain

The three machines cover sequential stages that are most often difficult for large-sized products: sheet metal cutting, long rotary parts processing and final machining of welded assemblies. When these operations are managed in-house, dependencies on external contractors are reduced, which usually leads to more predictable deadlines and clearer quality control for complex orders.

Компаниите, които планират проекти в тежкото машиностроене или морската индустрия и търсят капацитет за разкрой, обработка и довършване на едроформатни компоненти, могат да се свържат с ТМ-Технолоджи АД за обсъждане на изискванията и възможните срокове по конкретно запитване.

TM-Technology JSC is a member of the Ruse Chamber of Commerce and Industry.

Contacts

Address: 7000 Ruse, TEGRA Industrial Zone, 100 Tutrakan Blvd.
Tel./fax: +359 82 845 877
Email: office@tm-technology.bg

Technical parameters (summary)

Portal machining center for large-sized parts (special version)
Working strokes: 17.5 m / 7.6 m / 2.5 m / 2.5 m
Turntable: Ø 3 m, load capacity 40 t
Processing of parts up to 80 tons
Custom designed
30 kW laser cutting machine
Cutting large-format steel sheets up to 80 mm
Worktable: 4 x 24 m
3D laser head for bevels up to 45 degrees
Renovated lathe for large rotary parts
Part length: up to 10 m
Diameter: up to 1450 mm
Maximum workpiece weight: 16 t
Complete renewal of drives, electronics, monitoring systems and control